0086-731-84427228
info@zr-product.com
1.High specific density : the specific density is 1.6 times more than ordinary zirconia beads.
2.Preventing material from contamination because of its extreme low wear rate.
3.High grinding efficiency.
4.Lower total cost with longer using life.
grinding and dispersion of coatings and paints.
organic/inorganic pigments, e.g. titanium dioxide, ultra marine, iron oxide, etc.
pigments to dye textiles, plastics and food.
electric ceramics, e.g. barium titanate, piezoelectric ceramics, sensors, condensers.
medical technology, e.g. dentures and hip prosthesis.
magnetic ceramic, ferrite.
technical ceramic components, e.g. exhaust cultivator in engine technology.
dispersion of fungicides, herbicides, insecticides.
grinding of pigments and solids for lipsticks, skin and sun protection creams.
nano grinding for the production of active substances and supplies substances.
in high energy mills, like pin-mills.
for water-based milling products with low viscosity, low solids - like ink-jet.
in the food industry, for pharmaceutical products and cosmetics.
| Items | Specification |
|---|---|
| ZrO2 | 94.8±0.2% |
| Y2O3 | 5.2±0.2% |
| Bulk Density | ≥3.7g/cm3 |
| Specific Density | >6.05g/cm3 |
| Compressive strength | >2.0KN (Φ2mm) |
| Vickers hardness | >1200 |
| Self consumption (ppm/h) | <0.5 |
| Roundness | ≥0.98 (Xmin/Xmax) |
| Color | White |
| Size(mm) | Size(mm) | Size(mm) | Size(mm) | Size(mm) | Size(mm) |
|---|---|---|---|---|---|
| 0.05-0.1 | 0.1-0.2 | 0.2-0.3 | 0.2-0.4 | 0.3-0.4 | 0.4-0.5 |
| 0.4-0.6 | 0.5-0.7 | 0.6-0.8 | 0.7-0.8 | 0.7-0.9 | 0.8-1.0 |
| 0.9-1.0 | 0.9-1.1 | 1.0-1.2 | 1.2-1.4 | 1.4-1.6 | 1.6-1.8 |
| 1.8-2.0 | 2.0-2.2 | 2.2-2.5 | 2.5-2.8 | 2.8-3.2 | 3.2-3.5 |
| 4 | 5 | 6 | 7 | 8 | 10 |
M=3.14×R2×D×L×(25%-50%)÷1000
M: Total quantity of ceramic ball
D: Density （g/cm3）
R: Radius of the mill (cm)
L: Length of the mill (cm)
1.High specific density : the specific density is 1.6 times more than ordinary zirconia beads.
2.Preventing material from contamination because of its extreme low wear rate.
3.High grinding efficiency.
4.Lower total cost with longer using life.
grinding and dispersion of coatings and paints.
organic/inorganic pigments, e.g. titanium dioxide, ultra marine, iron oxide, etc.
pigments to dye textiles, plastics and food.
electric ceramics, e.g. barium titanate, piezoelectric ceramics, sensors, condensers.
medical technology, e.g. dentures and hip prosthesis.
magnetic ceramic, ferrite.
technical ceramic components, e.g. exhaust cultivator in engine technology.
dispersion of fungicides, herbicides, insecticides.
grinding of pigments and solids for lipsticks, skin and sun protection creams.
nano grinding for the production of active substances and supplies substances.
in high energy mills, like pin-mills.
for water-based milling products with low viscosity, low solids - like ink-jet.
in the food industry, for pharmaceutical products and cosmetics.
| Items | Specification |
|---|---|
| ZrO2 | 94.8±0.2% |
| Y2O3 | 5.2±0.2% |
| Bulk Density | ≥3.7g/cm3 |
| Specific Density | >6.05g/cm3 |
| Compressive strength | >2.0KN (Φ2mm) |
| Vickers hardness | >1200 |
| Self consumption (ppm/h) | <0.5 |
| Roundness | ≥0.98 (Xmin/Xmax) |
| Color | White |
| Size(mm) | Size(mm) | Size(mm) | Size(mm) | Size(mm) | Size(mm) |
|---|---|---|---|---|---|
| 0.05-0.1 | 0.1-0.2 | 0.2-0.3 | 0.2-0.4 | 0.3-0.4 | 0.4-0.5 |
| 0.4-0.6 | 0.5-0.7 | 0.6-0.8 | 0.7-0.8 | 0.7-0.9 | 0.8-1.0 |
| 0.9-1.0 | 0.9-1.1 | 1.0-1.2 | 1.2-1.4 | 1.4-1.6 | 1.6-1.8 |
| 1.8-2.0 | 2.0-2.2 | 2.2-2.5 | 2.5-2.8 | 2.8-3.2 | 3.2-3.5 |
| 4 | 5 | 6 | 7 | 8 | 10 |
M=3.14×R2×D×L×(25%-50%)÷1000
M: Total quantity of ceramic ball
D: Density （g/cm3）
R: Radius of the mill (cm)
L: Length of the mill (cm)
湘ICP备12012704号 All Rights Reserved © 2010-2028 Zr-Product.com
Tel: 0086-731-84427228
Fax: 0086-731-84483877
Add: No.766 Wuyi Road, Changsha, China
湘ICP备12012704号 All Rights Reserved © 2010-2028 Zr-Product.com
Location :